How to Make a WASD Converter in Scrap Mecanic

As a Bonus post, I decided to make a small instruction Manual on WASD Converters. They are surprisingly easy to create, and when I found out I was shocked at how easy it was! Credit goes to Luap the Great on this video, and he gave credit to Durf, who gave credit to someone else. Right, Here goes!


                                                                    AD Converter
You will need...

Lift (Optional), Connect Tool, One Bearing, One small pipe, One Small pipe bend, One Large pipe T-Join and Two Screwheads. And two sensors that I forgot.

1. Place the bearing and Pipes as shown:

2. Add the sensors and set their range to 1

3. Add the large pipe and Bolts to the end of the small pipes

4. Connect bearing to seat and sensors to left/right appliances, e.g. Thrusters

And That's an AD Converter!

WS Converter

You will need:

One Electric Engine, Connect Tool, One Bearing, One Sensor, One Small Suspension, Two Small pipe T-Joins, Two Boltheads, and One straight small pipe. (I accidentally put two sensors in this picture, and no Straight pipe.)

1. Place the Pipes and Sensors Like this:

2. Place on the Suspension, Block, and the boltheads.

3. Connect the bearing to the engine...

... And the sensors to your devices!

And that's the full set! It's a very simple but effective system, and I'm surprised that not everyone knows it! This post may not have been so entertaining for those who don't have the game, (In which case I'd very much recommend it), but hopefully other posts will be of more interest to other people!

Thanks again,

Black_Master_812.

========================================================================

Steam Profile == http://steamcommunity.com/profiles/76561198372894582/

Buy Scrap Mechanic! == http://store.steampowered.com/app/387990/Scrap_Mechanic/